Product ID:TIONA 552
MSDS Date:08/01/1987
FSC:8010
NIIN:00N031236
MSDS Number: BPJVP

SCM CHEMICALS

7 ST PAUL STREET
BALTIMORE, MD 21202
US

Emergency Phone: 301-783-1120

Info Phone: 301-783-1120;301-355-3600

Preparer: J.H. BLACKER

Cage: 46343

SCM CHEMICALS

BALTIMORE, MD 21202 US

Telephone: 301-783-1120;301-931-4570

Cage: 46343

RUTILE; (TITANIUM DIOXIDE)

CAS: 1317-80-2

RTECS: XR2275000

Fraction By Weight: 80-97%

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILICA GEL;(AMORPHOUS SILICA)

CAS: 112945-52-5

RTECS: VV7310000

Fraction By Weight:

OSHA PEL 6 MG/M3 DUST

ACGIH TLV: 10 MG/M3 TDUST

3) OXIDE;(ALUMINUM OXIDES (AS AL*2O*3))

CAS: 1344-28-1

RTECS: BD1200000

Fraction By Weight:

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:LD50:(ORAL RAT)>9000 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:INERT NUISANCE DUST. TEMPORARY
DRYING EFFECT OR IRRITATION OF MUCOUS MEMBRANES MAY RESULT FROM
EXCESSIVE EXPOSURE. SKIN:NON-CORROSIVE; NON-IRRITATING;
NON-SENSITIZING; MAY HAVE DRYING EFFECT ON SKIN. EYE:INERT FOREIGN
BODY HAZARD ONLY. INGEST:HARMLESS, PHYSIOLOGICALLY INERT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYE:FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:WASH WITH MILD SOAP & WATER. INHAL:MOVE TO FRESH AIR.
INGEST:NO TREATMENT REQUIRED. MATERIAL IS COMPLETELY ELIMINATED
THROUGH GI TRACT IN A BOUT 24 HOURS. CALL MD IMMED .

Flash Point:NON-FLAMMABLE
Extinguishing Media:NO FIRE HAZARD. USE MEDIA SUITABLE FOR SURROUNDING
FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Spill Release Procedures:USE ANY FEASIBLE MECHANICAL MEANS:BROOM,
BRUSH, SCOOP, VACUUM, OR WET ABSORBENT MATERIAL, BUT AVOID DUSTING
DURING CLEAN-UP.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NIOSH/MSHA APPROVED DUST RESPIRATOR IF TLV IS OR
MAY BE EXCEEDED.
Ventilation:LOCAL EXHAUST, IF REQUIRED TO MAINTAIN AIRBORNE
CONCENTRATION BELOW THE TLV.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
PH:(10% SLURRY) PH OF WATER SUSPENSION 5.5- 8.5.

HCC:V7
Melt/Freeze Pt:M.P/F.P Text:3326F,1830C
Spec Gravity:3.7-4.2(H2O=1)
pH:SUPDAT
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE, TASTELESS, ODORLESS POWDER

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:THIS PRODUCT WHEN SPILLED CAN BE DISPOSED OF
INTO SANITARY LANDFILL OR INDUSTRIAL WASTE DISPOSAL LANDFILL.
PLEASE REVIEW APPROPRIATE STATE INDUSTRIAL WASTE DISPOSAL
REGULATIONS. DISPOSAL MUST BE IN AC CORDANCE W/ALL LOCAL, STATE,
AND FED REGS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.